10bar pharmaceutical industry steam boiler

2021 / Sep / Mon
The price of a 10bar steam boiler in the pharmaceutical industry is about $6000-$30000. The fuel can be natural gas, liquefied petroleum gas, coal and other fuels.

Fangkuai WNS series horizontal internal combustion boilers are shell-type 3-pass wet-back oil/gas boilers. After the fuel is atomized by the burner, the flame fills the wave furnace and transfers heat through the furnace wall. This is the first path; the high-temperature flue gas is collected in the reversing chamber, and then enters the second channel, which is the grooved tube bundle area; after heat convection , The temperature gradually drops, enters the front smoke box, turns to the third channel, that is, the smooth tube bundle area, and then enters the chimney through the rear smoke box and exhausts to the atmosphere.

1. Using low-pressure and high-temperature heating medium, it is convenient to adjust, heat evenly, and meet the precise process temperature.

2. Liquid circulation heat, no condensation heat loss and discharge, and the heating system has high thermal efficiency.

3. Compensation measures for the heat, heat and temperature fluctuation of the working medium to the volume change in the system.

4. Technical measures to strictly control low volatile content such as air and water before circulating the heat medium.

5. The boiler has a fully wet back three-inverse chamber design, and the thermal efficiency can be as high as 98% or more.

6. The boiler is equipped with high safety pressure and water level alarm equipment, and advanced automatic PLC control.

Therefore, if you have boiler needs, it is better to carefully select the boiler manufacturer. Fangkuai Boiler has A-level boiler manufacturing qualification and first-level boiler installation qualification. It has focused on the research and development of steam boilers, coal-fired boilers, biomass boilers, oil-fired boilers and other boilers for more than 20 years. The boilers of large factories are guaranteed and the price is low. , Such as common biomass boilers, oil-fired boilers and other quotations, the factory sends directly with high quality and low price. The thermal efficiency is high, and the heating area is larger than that of general boiler manufacturers. Some common boiler problems can be avoided, and the cost of gas boilers is reduced, corresponding to the increase in the cost-effectiveness of boilers.